What the Pressure Pro 1600 is used for
The Pressure Pro 1600 is a wide-format roll laminator set up for jobs where even pressure matters more than speed alone. It helps keep finishes consistent on posters, maps, presentation boards, artwork and point-of-sale material, especially when you are working with mixed media or repeated runs. If you handle short production batches or varied substrates, controlled roller pressure gives cleaner results and fewer retries.
It is a solid fit for print shops in Johannesburg, Sandton and Randburg, as well as design studios, schools and signage teams that need dependable output. It also works well for coastal clients in Durban, Gqeberha and Cape Town where humidity can make laminating and storage a bit tricky.
Size options and working width
The Pressure Pro 1600 is designed around a 1600 mm class working width, making it suitable for wide-format sheets and standard commercial jobs. That width gives enough room for posters, technical drawings, display panels and artwork boards without having to split work into smaller passes. If your team often handles mixed sheet sizes, the machine’s width makes day-to-day loading simpler and quicker.
- Working width: 1600 mm class
- Suitable for short run and repeat production
- Handles common wide-format print and mount work
- Useful for shops with limited floor space but regular volume
For businesses in Midrand, Pretoria and the East Rand, this size often suits shops that need one machine to cover multiple finishing tasks without taking up too much room.
Where it suits best
This model is a practical choice for print shops, graphic designers, artists, educational institutions and in-house marketing teams. It is especially useful where the finished piece must stay flat and clean, with controlled pressure helping reduce bubbles, lift and edge issues. For mounted work and protective finishing, the machine gives a more consistent result than manual methods.
- Print shops with regular laminating runs
- Design studios finishing client artwork
- Signage and display workshops
- Schools, colleges and training centres
- Corporate marketing departments
If your workload includes last-minute municipal tenders, presentation panels or event graphics, having a dependable laminator on site can save time when deadlines are tight.
Installation and site requirements
We install nationwide from our base in Kya Sand, Johannesburg, with support in Randburg, Sandton, Midrand, Pretoria and the East Rand. Before installation, check that the machine can be positioned on a level surface with enough space for feed-in and collection, plus room for the operator to move safely around the unit. A clear, dry area is important, particularly in workshops where paper dust or offcuts can collect.
Power needs should be confirmed before delivery. The exact supply depends on the final configuration, but you should plan for a stable electrical feed, proper earthing and protection against load-shedding surges or inconsistent supply. In some sites, a backup power setup is worth discussing before installation so the rollers and heating system are not exposed to sudden interruptions.
- Level floor and clear access on both sides
- Stable electrical supply with correct earthing
- Backup power planning recommended in load-shedding areas
- Dry room conditions preferred for best results
Care, cleaning and scheduled servicing
To keep pressure even, rollers should be cleaned regularly and pressure settings checked as part of routine servicing. Dust, adhesive residue and fine paper fibres can build up over time, which affects finish quality and can mark sensitive media. For coastal sites, regular inspection matters even more because humidity can affect both the materials and the machine environment.
Our service support includes routine servicing, roller cleaning, pressure calibration, heat system checks, drive system repairs, electrical fault finding and on-site breakdown attendance. We also supply spare parts support and operator refresher training, which helps teams avoid common handling errors and keeps the machine in proper working order. A small issue left too long can turn into a bigger repair, so early checks are worth it.
What to confirm before ordering
Before you place an order, make sure the machine matches the type of work you produce now and the jobs you want to take on next. Pressure control is only part of the picture, so it is worth checking the media range, sheet width, operator skill level and your available power supply. If you are upgrading from a smaller unit, measure your floor space and roller access carefully.
- Largest sheet size you need to process
- Media types and thicknesses used most often
- Available power supply and backup arrangements
- Space for loading, unloading and maintenance
- Whether you need training for more than one operator
We also offer pre-purchase inspections, which help buyers confirm that the machine suits the site and workload before they commit. If you are in Kya Sand, Sandton, Midrand or Pretoria, our team can talk through the setup and match the unit to your production requirements.
Key facts
| Model | Pressure Pro 1600 |
|---|---|
| Working width | 1600 mm class |
| Machine type | Wide-format roll laminator |
| Pressure control | Controlled roller pressure adjustment |
| Applications | Print finishing, artwork protection, signage and display work |
| Support | Installation, servicing, spare parts and operator training nationwide |
