What Mount Board 1600 does on the shop floor
Mount Board 1600 is a wide-format mounting solution used to bond printed sheets onto rigid boards without bubbles, wrinkles or uneven pressure marks. It is built for print shops, sign makers, schools, studios and in-house marketing teams that need mounted posters, exhibition boards, point-of-sale panels and artwork ready for display.
The unit is suited to jobs where the print must stay flat and look tidy, especially when the work will be handled, transported or displayed for long periods. For Johannesburg and Pretoria businesses, that often means a cleaner finish for board mounting, with less time spent fixing creases by hand.
It works with common mounting media and display boards used in the South African market, so operators can match the machine to everyday production rather than setting aside only special jobs. On smaller runs or urgent customer orders, that matters because the setup stays simple and the finish remains predictable.
Sizes, roll options and job types it suits
The Mount Board 1600 is intended for wide-format work up to 1600 mm, making it suitable for standard poster sizes, presentation boards and larger graphics that need a rigid backing. Depending on the roll set-up and the material being used, operators can handle narrow jobs as well as full-width panels without changing the basic workflow.
It suits a mix of print applications:
- Mounted posters for retail and promotions
- Presentation boards for schools and corporate clients
- Artwork mounting for studios and galleries
- Directional signage for events and exhibitions
- Display panels for showrooms and product launches
For shops in Randburg, Sandton and Midrand that take a variety of daily orders, that flexibility helps keep the machine in use instead of standing idle. If your workload changes through the month, the same unit can handle small reprints, campaign boards and one-off display pieces without much adjustment.
Key specifications to note before you buy
Before placing an order, check that the board size, print width and daily output match the way your team works. The main specifications usually considered for this type of mounting system are the working width, roller pressure control, heat settings where fitted and the feed path for thicker rigid material. If you are handling foam board, corrugated board or other display substrates, the board thickness range matters as much as the width.
- Working width: up to 1600 mm
- Application: print mounting onto rigid boards
- Output type: smooth, flat display finish
- Material use: suitable for common mounting films and backing boards
- Control points: pressure, feed alignment and temperature where applicable
- Best use: short runs, presentation work and display production
Ask how the roller system handles repeat pressure across the full width, because uneven pressure shows up quickly on large boards. A small difference at one edge can become visible once the panel is trimmed and put under lights.
Installation requirements, power and workspace planning
Mount Board 1600 should be installed on a level floor with enough space at the front and back for board handling. A clear loading area helps operators feed larger sheets without bending the board or dragging dust onto the adhesive surface. In Kya Sand and other industrial areas around Johannesburg, a clean, dry bay is the best way to keep output consistent.
Power needs depend on the exact model and whether heat assistance is part of the set-up. As a rule, allow for a stable electrical supply and a dedicated point where possible, especially in workshops affected by load-shedding and voltage fluctuations. If the machine includes heated elements, check the supply rating before installation so there are no surprises on site.
There is no gas requirement for standard mounting use. If your team is placing the unit in a shared production room, leave enough space for safe board stacking, trimming and cooling after the lamination pass. Good airflow also helps in hotter months, because excessive heat in the room can affect handling and alignment.
Care, servicing and day-to-day upkeep
Regular care keeps the finish clean and the rollers in good condition. Dust, adhesive build-up and trimming debris are the main causes of marks on mounted boards, so the machine should be wiped down routinely and checked before the first job of the day. On high-volume days, a quick clean between batches can prevent transfer onto the next board.
Recommended upkeep includes roller cleaning, pressure calibration and heat system checks where the unit uses heat. Electrical fault finding may also be needed from time to time if the machine is moved, left idle for long periods or exposed to unstable supply conditions. We see this often in workshops that run across multiple sites, especially when equipment is switched off during outages then started again in a rush.
- Clean adhesive residue before it hardens
- Check roller pressure for even contact across the width
- Inspect feed alignment after moving the machine
- Keep the area free of board dust and offcuts
- Book service attention if the finish starts showing lines or lift at the edges
In coastal towns, humidity can affect some mounting materials, so keep stock sealed and stored off the floor. That small habit reduces warped board and saves time on rework.
What to check when ordering Mount Board 1600
When ordering, confirm the print width you use most often, the board thickness you plan to mount, and the monthly volume your team needs to process. It is also worth checking whether the work is mostly cold mounting, heat-assisted mounting or a mix of both. That information helps match the machine to the job rather than forcing the job to suit the machine.
Other useful checks include spare parts support, operator refresher training and whether your installation site has enough access for delivery and set-up. If the machine will be used in a busy production room, ask about pre-purchase inspection and on-site breakdown support so you know what help is available after delivery. A good supplier should also talk you through the controls before the first production run, not after a problem appears.
For customers across Sandton, Pretoria, the East Rand and beyond, having the right mounting setup means fewer rejects and a more professional final board. If you are unsure about the right configuration, send through your board sizes and the type of work you do, and we can help you match the unit to your daily output.
Key facts
| Product name | Mount Board 1600 |
|---|---|
| Working width | Up to 1600 mm |
| Primary use | Mounting prints onto rigid display boards |
| Finish type | Flat, smooth presentation finish |
| Suitable for | Print shops, sign makers, studios, schools and display work |
| Support options | Routine servicing, roller cleaning, pressure calibration, on-site breakdown support |
